World's Fastest Bike

ViSIoN · #1 (**permalink**) 02-10-2008, 10:36 PM

THE TOMAHAWK

This is 8200CC Monster of a Bike. It's like
riding a 2-wheeled Train Engine.

ENGINE

500 BHP (372KW)@ 5600 RPM (60.4 BHP/LITER); 525LB,-FT (712nM)@ 4200RPM
10-cYLINDER 90 DEGREE v-TYPE, LIQUID-COOLED, 505 CUBIC INCHES (8277cc)
356-T6 ALUMINUM alloy block with cast iron liners, aluminum alloy cylinder heads.
Bore x Stroke: 4.03 inches x 3.96 inches (102.4 x 100.6)
Two purshrod actuated overhead valves per cylinder with roller type hydraulic lifters.
Sequential, multi port electronic fuel injection with individual runners
Compression Ration: 9.6 : 1
Max Engine Speed : 6000rpm
Fuel Requirement: Unleaded premium, 93 octane (R+M/2)
Oil System: Dry Sump; takes 8 quarts Mobil 110W30 Syntheic.
Cooling System: Twin aluminum radiators mounted atop engine intake manifolds, force-
fed from front-mounted, belt driven turbine fan.
Take 11 quarts of antifreeze.
Exhaust System: Equal lenght tubular stainless steel headers with dual collectors and
central rear outlets.

SUSPENSION:

FRONT

Outboard, single side parallel upper and lower control arms made from poloshed billet

aluminum. Mounted via ball joint to aluminum steering uprights and hubs, Five degrees

caster. Single, fully adjustable centrally located coil over damper (2.25 inch coil with

adustable spring perch); pullrod and rocker actuated mono linkage. Center lock racing

style hubs.

REAR:

hand fabricated box section steel inboard swing arms, incorporating "hydral link" lockable

recirculating hydraulic circuit parking stand. Single fully adjustable centrally located

koni coil over damper (2.25 inch coil with adjustable spring perch); pushred and rocker

actuated mono linkage. Center lock racing style hubs.

BRAKES:

FRONT

20 inch perimeter mounted drilled machined stainless steel rotors, one wheel. Two four

piston fixed aluminum calipers per wheel (16 pistons total), custom designed. Blue

anodized caliper finish. hand actived.

REAR

20 inch perimeter mointed drilled cast iron rotors, one per wheel. One four piston fixed

aluminum caliper per wheel (8 pistons total), custom designed. Blue anodized caliper

finish. Foot activated. The Tomahawk is a Viper V-10 based motorcycle, a 500

horsepower engine with four wheels beneath it. Chrysler will e selling the otiginal

Tomahawk comcept and nine replicas through Neiman Marcus, for up to $555.000 each,

The motorcycles cannot be licensed, so they cammot be legally driven on public roads. A

Chrysler spolesman told Reuters they were meant as rolling sculptures. Rumors had the

Tomahwak selling for under $200.000 most likely at a loss or breakeven price, for

publicity purposes bur still fully drivable.

Wolfgang Bernhard, Chrysler's not particularly respected first mate, was said to nbe

enthusiastic about that project, so mich so that hundreds were projected to be built at

under $200.000 each. They reportedly cost Chrysler over $100.000 to build (admittedly the

work is outsourced).

The Dodhe Tomahawk can reach 60 miles an hour in about 2.5 seconds, and has a

theoretical

top speed of nearly 400 mph. Each pair of wheels is separated by a few inches and each wheel

has an independent suspension. Bernhard said four wheels were necessary to handle the power

from the engine. The Tomahawk remains on display at auto shows though well out of reach of

the general public, elevated on a special display.

PERFOEMANCE:

0-60 MPH: 2.5 seconds (est.)
Top Speed: 300+ mph (est.)

DIMENSIONS:

Lenght: 102 inches
Width: 27.7inches
Hight: 36.9 inches
Wheelbase: 76 inches
Seat Height: 29 inches
Weight: 1,500 lbs.
Track Front: 10 in
Weight Dist: 49 F/5-1R
Ground Clearance: 3 in
Fuel: 3.25 gallons

ELECTRICAL SYSTEM:

Alernator: 136-amp high-speed
Battery: leak resistant, maintenance free 600 CCA
Lighting: Headlights consist of 12 five watt LEDs, front, with beam-modifying optics and

masked lenses. Eight LEDs, rear, Headlamps articulate with wheels.

TRANSMISSION:

Manual, foot shifted two speed

Aluminum cased two speed, sequential racing stle with dog ring, straight cut grears.

Gear Ration: 1st 18:38 and 2nd 23:25.
Clutch: Double disc, dry plate with organic friction materials, hand lever actuated with assist
Final drive: Dual 110 link motorcycle style chains
Front Sprocket: 14 Teeth
Rear Sprockets: 35 Teeth

Longitudinal, Centrally mounted engine, rear wheel drive layout; monocoque construction,

engine is ventral, stressed member. Body of billet aluminum.

Real8 · #2 (**permalink**) 02-13-2008, 12:02 AM

damn. . . . that shit looks powerful

ViSIoN · #3 (**permalink**) 02-14-2008, 10:08 AM

thanks...Real...8-

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Top 10 Fastest Cars in the World	mytonse	Automobiles Hub	21	07-26-2007 01:52 AM
World's Fastest Motorbike	RAHEN	Automobiles Hub	4	06-25-2007 11:23 AM
Worlds Fastest Bike	badboy rulzzzz	Automobiles Hub	14	06-11-2006 03:23 PM
British to get world's fastest internet.	Endurer	IT Hub	4	05-06-2006 02:05 AM
Fastest ball ever	schahzad	Teen Talks	0	04-12-2006 06:33 PM